Green House Builders
Get Free Estimate
Solar Reflection Index

Solar Reflection Index For Various Materials

Reflectance of Roof Materials

Material Solar Reflectance (%) Temperature of Roof over Air Temperature (°F)
Bright white coating (ceramic, elastomeric) on smooth surface 80% 15°
White membrane 70%-80% 15°-25°F
White metal 60%-70% 25°-36°F
Bright white coating (ceramic, elastomeric) on rough surface 60% 36°F
Bright aluminum coating 55% 55%
Premium white shingle 35% 60°F
Generic white shingle 25% 70°F
Light brown/gray shingle; 20% 75°F
Dark red tile 18%-33% 62°-77°F
Dark shingle 8%-19% 76°-87°F
Black shingle or materials 5% 90°F
Source: Oak Ridge National Laboratory, Lawrence Berkeley National Laboratory, and the Florida Solar Energy Center

S R I for abc Weather Proof Tiles : 95 (95%)

How to use the Cool Roofing Materials Database? :

Examine the relative "coolness" of various types of building materials, to select a type of roofing or roof coating which may meet your needs to reduce air conditioning energy use or to improve comfort.

The table below shows the temperature rise in full sun. Assumed that there is little wind (wind helps cool the roof). Keep in mind that this is the temperature rise, not the temperature itself. Thus a temperature rise of 90 degrees F on a 100 F day means the roof surface temperature peaks at 190 degrees F!.

Material Roof temperature rise above air temperature (degrees F, full sun, no wind) Remarks
Bright white smooth materials 15 F The coolest construction materials. Can be roof coating, membrane, metal, glazed tile, etc. A soiled white is warmer, about 30 F.
Rough white surface 35 F Rough surfaces of any given material absorb more sunlight than smooth surfaces
Very light (pastel) colours 15 to 55 F
Intense but not very light colours (green, red, blue, etc.) 79 to 83 F Research may identify cooler colours
Medium grey 52 F Reflectance half way between white and black
Built-Up Roof (BUR) covered with gravel 61 - 83 F Cooler values obtained with lighter gravel
Black materials 90 F

Cool Roofs for Hot Climates

If you have hot summers, now is also the time to think about changing the color and reflectivity of your roof. A dark roof can get up to 180°F on a sunny, windless day. A white roof or roof coating will reflect more of the sun's heat so that your attic and your house stay cooler. Flat roofs are especially good candidates, because you can't see them from ground level.

Look for a material with a high solar reflectance (sometimes called albedo). The best ones are usually smooth and white. There are, for example, white roof coatings that can be applied over asphalt shingles and most other roofing substrates (see Table). When first applied, these can provide a solar reflectance of up to 80%, which means that only 20% of the sun's energy is being absorbed as heat. White roof coatings do weather and get dirty, however. After several years, their reflectance may go down to about 50%. This is still a significant benefit, but the degradation is worth keeping in mind.

Reflectance tests show that some roof coatings, including so-called ceramic coatings and elastomeric coatings, provide a solar reflectance of over 80%. Conventional white asphalt shingles, in contrast, typically reflect only about 25% of sunlight. This is because they are actually gray, with a rough texture and a black substrate. Premium white asphalt shingles use a whiter white granule, providing a reflectance of up to 35%.

Solar reflectance isn't the only property to look for in a roofing material. It should also have a high infrared emittance to help the roof shed heat by re-radiation. Most materials do with the notable exception of aluminum roof coatings. Aluminum will stay warmer at night, while a white roof coating will radiate more of its stored heat back to the sky. For this reason, aluminum will not perform quite as well as a white material with a similar solar reflectance.

Your options will depend on the type of roof you have and how extensive your reroofing project is. If you have a low-sloping or flat roof that can't be seen from below, you can buy solar-reflective white roofing at almost the same price as standard dark roofing. If you have a sloped roof, you probably want shingles, because they're more aesthetically pleasing. But you may have trouble finding solar-reflective asphalt shingles. You will probably need to get the more expensive white clay, concrete, or fiber cement tiles--or painted metal shingles.

Light-colored roofs have an added advantage over dark roofs: they tend to last longer. The constant heating and cooling of a roof causes it to expand and contract, causing wear and tear on the materials. Cooler roofs are generally more durable.

Regardless of reflectance, material also affects how well the roof sheds heat. For instance, curved tiles and wood usually allow air to circulate. This helps to keep them cool. Again open pores will help to reduce heat transfer by conduction. (Note: abc Tile contains 32% open porosity & embossed).

Enquire Now!

Terrace :  

Comparative Chart
(abc Cool Roofs)
Our Products

Abc Weather Proof S.R.I(Cool) Coat

These tiles are suitable for roof top / terrace due to ability to reflect solar heat. Solar Reflectance Index is 95.

Abc Weather Proof S.R.I Tiles

These tiles are suitable for roof top / terrace due to ability to reflect solar heat. Solar Reflectance Index is 95.

Hollow Tile + abc Cool Coat

These tiles are suitable for roof top / terrace due to ability to reflect solar heat. Solar Reflectance Index is 95.

Knowledge Base
Contact Expert